Due to supply chain issues brass couplings may be imported. If you require domestic couplings please call to place your order. There will be a surcharge and lead time is unknown. There is no change to the hose itself, which is woven and manufactured in the USA. We will switch back to U.S. manufactured couplings as soon as we are able.

All of our domestic hoses are supplied by the largest manufacturer of fire hose in the United States. They have specialized in municipal fire fighting, industrial, military and marine hoses for the past 35 years. Every assembled hose is pressure tested by the manufacturer to ensure safety and reliability. Hoses are produced to meet applicable NFPA, UL, MSHA, FM, FDA and MIL‑H‑24606 standards.

Our Made in USA double jacket lay-flat hose meets and exceeds all NFPA 1961 standards. This hose is constructed of an EPDM synthetic rubber tube and a double layer of 100% polyester woven jackets. The rubber lining is a single-ply extruded tube of synthetic EPDM compounded to resist ozone. Double jacket refers to the second layer polyester covering woven from staple polyester yarn added for increased abrasion resistance.

Brass couplings are almost never used in the fire service anymore.

How To Purchase Fire Hose

• Always ask where the hose is manufactured - Buy American!
• Adding color impregnation improves durability compared to untreated white hose
• 50 foot lengths are easier to handle and offer more layout flexibility vs. 100 foot lengths
• The most common hose, thread and couplings in use by fire departments today is double jacket hose with aluminum NH / NST
• Double jacket hose with any color is the most durable hose available

Applications

• De-contamination / Wash Down
• Corrosive Environments
• Salt Water Environments
• Chemical Fire Protection

Test Ratings (Water Only With Expansion Ring Couplings)

• Service Pressure (A 3-minute hydrostatic test conducted by users on in-service hose to determine suitability for continued service)
• Proof Test Pressure (A pressure equal to a least two times the service test pressure)
• PSI Burst Test Pressure

• Hose is mfg in USA, Brass couplings may be imported
• Hose Size: 2 1/2 inches (Inside Diameter)
• Hose Length: 50 feet (Approximately)
• Male Coupling: Brass 2 1/2 inch NH / NST
• Swivel Female Coupling: Brass 2 1/2 inch NH / NST
• The Female Coupling Will Only Connect to a Male 2 1/2 inch NH / NST
• Compatible Nozzle: 2 1/2 inch NH / NST only
• Hose Type: Polyester Double Jacket (Mildew Resistant)
• Color: White
• Liner: EPDM Rubber
• Approximate Width Laying Flat: 4 1/4 inches
• Service Pressure: 300 PSI
• Proof Test Pressure: 600 PSI
• Burst Test Pressure: 900 PSI
• UL Listed

2 1/2" Hose Male Couplings

• Inside diameter of a male coupling: 2 1/2 inches
• Outside diameter of a male NH / NST coupling: 3 1/16 inches (7.5 Threads per inch)
• Outside diameter a male NPSH or NPT coupling: 2 7/8 inches (8 Threads per inch)

Download Spec Sheet

Connections

• The female side of a NH / NST coupling will only connect to a male NH / NST connection
• The male side of a NH / NST coupling will only connect to a female NH / NST connection
• The female side of a NPSH coupling will only connect to a male NPT pipe or a male NPSH connection
• The male side of a NPSH coupling will only connect to a female NPSH connection. It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.
• The female side of a garden hose will only connect to a male garden hose connection.
• The male side of a garden hose will only connect to a female garden hose connection.
  

The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread but NST or NH is more common these days. NH = NST

Limited 10-Year Warranty

We will replace any fire hose with manufacturer defects in material and workmanship. All warranty claims must be returned to us for inspection before we determine a solution.

Our warranty does not cover gaskets, shipping cost, cosmetic damages, normal wear-and-tear, improper use or chemical damage.

Fire hoses purchased for use at Fire Training Facilities will have a 90-day Manufacturer Defect warranty only.

Upon receipt of the returned goods, hoses will be subject to inspection and testing.

Should it be determined that the hose is covered by warranty, it will be repaired or replaced.